RFID electronic anti-counterfeiting tags are very common in our lives. RFID is similar to barcode scanning, but RFID uses a special RFID reader and RFID electronic tag that can be attached to a target,RFID silicone Tag and uses frequency signals to transfer information from the RFID electronic tag To RFID reader. If the RFID electronic label fails,RFID Silicone Tag it will not be able to scan and apply, so under what circumstances does the RFID electronic security label fail?

There are three cases of RFID tag failure: the first case: the tag is damaged, the RFID electronic tag has a chip, if the chip is pressed by external force or high static electricity may fail. Antenna, if the RFID signal is damaged by the antenna, it will also cause failure. Therefore, RFID electronic tags must not be damaged or torn by compression. Generally demanding RFID electronic tags will be packed in Plastic cards to avoid damage by external forces.

The second case: the tag is not damaged,RFID Silicone Tag and the RFID electronic tag cannot penetrate the metal, so the metal can be shielded. It is difficult to penetrate water,RFID Silicone Tag water can absorb waves, and the sensing distance is limited. When covered, RFID can penetrate non-metallic or non-transparent materials such as paper, wood, and plastic,RFID Silicone Tag and can communicate penetratingly. The barcode scanner must be able to read the barcode only when it is close and there is no object blocking.

The third case: the reading distance is too far. In the actual application of high-frequency RFID electronic tags, we need to focus on the fitting position of the 13.56MHz RFID electronic tags. Due to the large size of the tags and the limited space allowed, the RFID electronic tags need to be directly attached to the metal On the surface or close to metal devices, such as 13.56MHz RFID smart tags for mobile phones, because of space problems, RFID Silicone Tag they are often directly integrated on the aluminum alloy stamping shell of the battery. In this way, during the identification process,RFID Silicone Tag RFID electronic tags It is susceptible to the eddy current interference of the aluminum alloy metal stamping shell of the battery, so that the actual effective reading distance of the RFID tag is greatly shortened or simply does not respond,RFID Silicone Tag and the reading fails completely. Practice has proved that such interference problems occur frequently,RFID Silicone Tag and we need to take certain measures to prevent them.

Under what circumstances will RFID electronic tags fail? Just share it here. When we use RFID electronic tags,RFID Silicone Tag we must avoid the above situations. Only in this way can we avoid the failure of RFID electronic tags.