Clear silicone sealant has been used for several years to seal windows and doors after installation. It is a good product to work with when waterproofing a task. It isn’t tough to use, and, by using quick and easy steps, you will probably find that you have become a pro. Remember, though, that silicone sealant bring various applications that need a definite, waterproof seal. Instructions 1. Insert the clear silicone sealant in the caulking gun. The caulking gun is a round, metal cylinder that will receive a tube of silicone sealant. It features a metal rod within that pushes over the rear with the tube of silicone sealant and forces the sealant away from a little gem on get rid of the silicone tube. By pressing a handle on get rid of the caulking gun, it is possible to control how much silicone that’s dispensed. 2. Silicone TubeTrim a tiny piece (about 2 inches long) off of the Plastic tip located at the end of the sealant tube. The tube is approximately 1/8 inch wide in the very tip, also it flares over to 1/2 inch at the point where it attaches towards the cylinder of sealant. Begin with a little piece after which come to the desired hole size because you require to. 3. Poke a protracted nail up through end in the tip and pierce the foil seal located inside tip possibly at the bottom of the sealant tube.4. Press the tip contrary to the method to be sealed and gently squeeze the handle located near the top of the caulking gun. When you’re carried out with the application, release pressure to succeed through the caulking gun by disengaging the metal rod with the handle. Failure to do this can result in sealant leakage. 5. Smooth the bead of silicone sealant out with your finger. Clear any excess silicone with a rag and paint thinner.